Ultrasound Paper for Vascular Labs and Vein Clinics: Choosing Standard or High-Density (2026)

Quick Answer

Vascular labs and vein clinics print a steady stream of study documentation, and most of it is filed, scanned or handed to a referring office. Durico ULSTAR-1100S is the compatible replacement for Sony UPP-110S (Type I, matte) and covers routine documentation at the lowest cost per roll. Durico 1100HD, the Sony UPP-110HD (Type II) compatible grade, adds a semi-glossy, high-density surface for labs that want finer grayscale on the page. Both fit Sony UP-895/897/898 Series printers.

Sony UPP-110S and UPP-110HD Compatibility Table

The two grades share one roll geometry and one printer family, so the decision is about surface and cost, not hardware. If you want the three-grade picture including gloss, the UPP-110HG vs UPP-110HD vs UPP-110S comparison lays it out.

What a Vascular Lab Actually Does With a Printout

Vascular and vein-clinic workflows tend to produce prints for a few predictable destinations: the paper chart, a scanning station that digitizes the page into the record, a referring physician's office, or a procedure file. Compared with an OB suite that hands out keepsakes, the print is almost always a working document. It gets stamped, annotated, filed and sometimes photocopied. That points the paper decision at handling and cost per page more than at presentation.

Two other realities shape the order. Vascular rooms run a lot of gel and a lot of hand contact, so a print that shrugs off moisture and fingerprints is more useful than one that marks easily. And many clinics, especially vein practices, run one or two printers on carts or in small procedure rooms rather than a fleet in a central department, so a stockout on a single printer stops hardcopy for the whole practice.

Standard or High-Density? A Practical Way to Choose

Durico describes 1100S as "Standard, matte finish, the most economical type" and 1100HD as "High Density, semi glossy," with the HD line promoted for its highest black colour density and precise gradation of grey-scale. All ULSTAR grades share the same five-layer film construction, so the surface finish is the variable. The surface and film construction breakdown explains the mechanics.

One caution on framing. Paper grade is a print-quality and workflow choice. It does not change what the transducer captures or what the console displays, and a hardcopy documents a study; it does not replace the clinical read. If a lab is deciding between grades, run a short side-by-side on your own printer and your own downstream process (scanning included) rather than assuming either answer. The cardiology and echo lab guide takes the same approach for a different workflow, and the two articles are meant to be read as a pair if your department covers both.

When you switch grades on a printer, update its paper-type menu setting to match the roll in the tray. If prints come out too dark or too light after a change, the contrast, brightness and paper-type settings guide walks through the menu steps on the UP-D898MD.

Gel, Fingerprints and Filing: Why Handling Properties Matter Here

Durico's product literature lists strong resistance to water, fingerprints and ultrasound gel drops, minimal curling for flat photo media and easy filing, and easy tearing along the cross direction. Those are the properties a vascular lab notices on an ordinary Tuesday, long before surface gloss comes up. They apply across the ULSTAR line, which means the handling benefits are available on the economical 1100S as well as on 1100HD.

Flat prints also matter if your practice scans pages into the record. A page that stays flat feeds a scanner more reliably than one that curls. Durico does not publish a numeric curl or archival-life figure, so treat this as a qualitative property and test a few pages through your own scanner before standardizing.

Cart-Based and Small-Practice Printers

A vein clinic with one cart and one printer has a different risk profile than a hospital vascular lab. There is no second printer to borrow paper from, and a missed reorder can stall hardcopy mid-clinic. Some practical habits help:

• Keep at least one spare box on the shelf per printer, and reorder when you open it.
• Store unopened rolls in their foil pouches, away from heat, direct sun and humidity. The storage guide covers what Sony's manual and Durico's packaging say.
• If your printer is DC-powered or cart-mounted, the mobile and cart-based paper planning guide covers field reordering for the UP-D898DC.
• If the room is also used for urgent bedside vascular checks, the point-of-care printing guide covers the standard-grade workflow.

The 5-roll versus 10-roll order-sizing guide helps decide box size. The compatibility is identical either way; only the reorder cadence changes.

Large-Format Vascular Suites

Some vascular suites and hybrid rooms run larger Sony units that take 210mm media. Durico documents ULSTAR-2100HD (210mm × 25m, 5 rolls per box, 25 rolls per carton) as the Sony UPP-210HD equivalent for the UP-970, UP-971, UP-990 and UP-991AD. That is a separate printer family from the 110mm Sony units above, and 110mm paper does not fit it. The UPP-210HD replacement guide has the details. For a printer outside Durico's documented ranges, check the printer's model label first and read the legacy Sony printer options guide before ordering.

Durico vs. Sony OEM Pricing

Sony OEM (original equipment manufacturer, meaning Sony-branded) UPP-110S and UPP-110HD 10-roll cases at medical resellers typically run roughly $140–$295, depending on the seller and grade. One reseller listed UPP-110HD at about $283 per 10-roll case when checked on 2026-10-09. Prices move, so compare current quotes. Durico's own literature states its ULSTAR line is priced 25–30% below competing products; treat that as Durico's published figure, not a guaranteed saving on any single quote.

Orders of $99 or more ship free; below that, shipping is a flat $7.95. Every ULSTAR roll is FDA Registered, manufactured under ISO 9001, ISO 14001 and ISO 13485 in South Korea, and sealed in its own foil pouch. For procurement conversations, the FDA Registered and ISO certification explainer and the purchase specification guide are useful companions, and the warranty guide answers the question most practice managers ask first.

Frequently Asked Questions

Which Durico paper replaces Sony UPP-110S for a vascular lab?

Durico 1100S, a standard matte grade at 110mm × 20m, is the compatible replacement for Sony UPP-110S (Type I). Durico documents it for the Sony UP-895, UP-897 and UP-898 Series printers.

Should a vascular lab use high-density or standard paper?

It depends on how the prints are used. Standard 1100S suits routine documentation that is filed or scanned, at the lowest cost per roll. High-density 1100HD suits labs that want finer grayscale gradation and higher black density on the page. This is a print-quality and workflow choice, not a diagnostic one.

Does high-density paper improve vascular study accuracy?

No. Paper grade does not change what the ultrasound system captures or displays. A hardcopy is a documentation and reference tool. The grade changes how the printed grayscale looks on paper.

Can I use both grades in the same Sony printer?

Yes. Both are built for the same UP-895/897/898 Series printers and the same 110mm width. Update the printer's paper-type setting to match whichever roll is loaded.

Will the prints hold up to ultrasound gel and handling?

Durico's literature lists strong resistance to water, fingerprints and ultrasound gel drops across the ULSTAR line. It publishes no numeric durability figure, so test a sample roll in your own workflow.

Is Durico compatible with my older Sony vascular cart printer?

Durico documents compatibility with the UP-895, UP-897 and UP-898 Series for 110mm grades, and UP-970, UP-971, UP-990 and UP-991AD for 2100HD. Check the model label on your printer. If it falls outside those ranges, confirm fit before ordering.

How many rolls should a single-printer vein clinic keep on hand?

There is no universal number. Log your own prints per roll for a few weeks, then keep one spare box per printer and reorder when you open it. The 10-roll box reduces reorder frequency; the roll itself is identical.

The Bottom Line

For most vascular labs and vein clinics, Durico 1100S covers the Sony UPP-110S spec for everyday documentation at the lowest cost per roll, and Durico 1100HD is the Sony UPP-110HD compatible upgrade when finer grayscale on the page matters. Both run in the same UP-895/897/898 Series printers, so a practice can start with one grade and add the other without changing hardware.

About Morgan Hayes

Morgan Hayes is the imaging supply specialist behind Precision Imaging Supply's resource center. With over a decade tracking the medical thermal printing market, Morgan helps imaging departments, OB/GYN clinics, veterinary practices, and independent ultrasound centers navigate the maze of printer-and-paper compatibility — including the Durico drop-in alternatives that save practices 30–50% versus OEM Sony media without compromising print quality.

Need Sony UPP-110S or UPP-110HD compatible paper for your vascular lab or vein clinic? Shop Durico 1100S, the compatible replacement for Sony UPP-110S or Durico 1100HD, the compatible replacement for Sony UPP-110HD, in stock now at Precision Imaging Supply.