Quick Answer
Musculoskeletal (MSK), sports medicine and pain management clinics print ultrasound images mostly for the chart, for injection and procedure documentation, and for the occasional handout to a patient or referring office. Durico ULSTAR-1100S is the compatible replacement for Sony UPP-110S (Type I, matte) and is the economical default for that kind of working print. Durico 1100HD, the Sony UPP-110HD (Type II) compatible grade, adds a semi-glossy, high-density surface. Both fit Sony UP-895/897/898 Series printers.
Sony UPP-110S and UPP-110HD Compatibility Table
| Sony OEM paper | Sony Type | Durico equivalent | Surface | Roll size | Printer compatibility | PIS product page |
|---|---|---|---|---|---|---|
| UPP-110S | Type I | Durico 1100S | Standard, matte finish | 110mm × 20m | Sony UP-895/897/898 Series | Sony UPP-110S compatible standard paper |
| UPP-110HD | Type II | Durico 1100HD | High density, semi glossy | 110mm × 20m | Sony UP-895/897/898 Series | Sony UPP-110HD compatible high-density paper |
Both grades share one roll geometry and one printer family, so the choice is about surface and cost, not hardware. For the three-grade picture including gloss, the UPP-110HG vs UPP-110HD vs UPP-110S comparison lays it out.
How MSK and Pain Clinics Actually Use a Printed Image
An MSK or sports medicine ultrasound is usually a focused, point-in-time exam: a tendon, a joint, a muscle belly, a nerve, a fluid collection. In pain management the scanner often supports a needle-guided injection. In both settings the print tends to serve a few practical purposes: documenting the finding or the target before a procedure, recording what the needle placement looked like, adding a representative image to the chart, or giving the patient or a referring provider a page that shows what was seen.
That mix points to a working-document print more than a presentation print. It gets annotated, filed, sometimes scanned, and occasionally photocopied. Cost per page and handling matter more than surface gloss. Many of these clinics also run a single portable cart or a compact system in a procedure room, so one printer and one paper supply carry the whole practice. The practical implication is the same one it is for any small site: a missed reorder stops hardcopy until the next shipment lands.
Standard or High-Density? A Practical Way to Choose
Durico describes 1100S as "Standard, matte finish, the most economical type" and 1100HD as "High Density, semi glossy," with the HD line promoted for its highest black colour density and precise gradation of grey-scale. All ULSTAR grades share the same five-layer film construction, so surface finish is the variable. The surface and film construction breakdown explains the mechanics.
| If your clinic... | Lean toward | Why |
|---|---|---|
| Prints procedure and injection documentation that goes straight to the chart | Durico 1100S (Sony UPP-110S Type I equivalent) | Matte finish, lowest cost per roll, same roll length and printer fit |
| Hands patients or referring offices a page they will look at closely | Durico 1100HD (Sony UPP-110HD Type II equivalent) | Semi-glossy surface built for finer grayscale gradation and higher black density |
| Does both routine documentation and select detailed studies | Both grades, stocked per printer | Same hardware; load the grade that matches the exam |
| Wants to keep supply costs predictable across several sites | Durico 1100S as the standard grade | Most economical grade in the line; one SKU simplifies reordering |
One caution on framing. Paper grade is a print-quality and workflow choice. It does not change what the transducer captures or what the console displays, and a hardcopy documents a study; it does not replace the clinical read or the saved digital image. If you are choosing between grades, run a short side-by-side on your own printer and your own downstream process rather than assuming either answer. The vascular lab and vein clinic guide and the cardiology and echo lab guide apply the same approach to neighboring workflows.
When you change grades on a printer, update its paper-type menu setting to match the roll in the tray. If prints look too dark or too light afterward, the contrast, brightness and paper-type settings guide walks through the menu steps on the UP-D898MD.
Gel, Hands and Cart Life: Why Handling Properties Matter
MSK and pain procedures are gel-heavy and hands-on. Durico's product literature lists strong resistance to water, fingerprints and ultrasound gel drops, minimal curling for flat photo media and easy filing, and easy tearing along the cross direction. Those properties apply across the ULSTAR line, so the handling benefits are available on the economical 1100S as well as on 1100HD. Durico does not publish a numeric durability, curl or archival-life figure, so treat these as qualitative properties and test a few prints in your own workflow before standardizing.
Prints headed for scanning into the record benefit from lying flat. If your clinic digitizes printouts, run a few pages through your scanner as part of any paper trial.
Small-Site Supply Habits That Prevent Stockouts
A sports medicine practice with one cart and one printer has no second printer to borrow paper from. A few habits cover most of the risk:
- Keep one spare box on the shelf per printer and reorder when you open it.
- Store unopened rolls in their individual foil pouches, away from heat, direct sun and humidity. The storage guide covers what Sony's manual and Durico's packaging say.
- Log your own prints per roll for a few weeks. Durico does not publish a prints-per-roll figure, so your own count is the reliable planning number.
- If your system lives on a cart that moves between rooms or sites, the mobile and cart-based paper planning guide covers field reordering for the UP-D898DC.
- If the clinic also handles bedside or walk-in scans, the point-of-care printing guide covers the standard-grade workflow.
The 5-roll versus 10-roll order-sizing guide helps decide box size. Compatibility is identical either way; only the reorder cadence changes.
Switching From Sony OEM Paper Without Surprises
Clinics that move from Sony-branded paper to a compatible grade usually want three answers: does it fit, will it work in my printer, and does it affect my warranty. Fit is documented in the table above. For the warranty question, the warranty guide covers what Sony's manual and consumer-protection law say, and it is not legal advice. For procurement paperwork, the FDA Registered and ISO certification explainer lists the certifications Durico documents. A practical way to de-risk the change is to install one 5-roll box on one printer, compare it with your current paper on your own images, and only then standardize.
If your ultrasound system or printer is not a Sony UP-895, UP-897 or UP-898 Series unit, check the model label first. The guide to identifying which paper a system needs and the legacy Sony printer options guide explain how to verify fit before ordering. Durico does not document compatibility outside its listed printer ranges, and neither should a supplier's listing.
Large-Format Units
Some larger Sony units used in multi-specialty or hospital-based sports medicine departments take 210mm media. Durico documents ULSTAR-2100HD (210mm × 25m, 5 rolls per box, 25 rolls per carton) as the Sony UPP-210HD equivalent for the UP-970, UP-971, UP-990 and UP-991AD. That is a separate printer family, and 110mm paper does not fit it. The UPP-210HD replacement guide has the details.
Durico vs. Sony OEM Pricing
Sony OEM (original equipment manufacturer, meaning Sony-branded) UPP-110S and UPP-110HD 10-roll cases at medical resellers typically run roughly $140–$295, depending on seller and grade. Prices move, so compare current quotes. Durico's own literature states its ULSTAR line offers a savings of 25–30% compared to competing products; treat that as Durico's published figure, not a guaranteed saving on any single quote.
| Durico SKU | 5-roll box | 10-roll box | In stock |
|---|---|---|---|
| Durico 1100S, Sony UPP-110S compatible | $43.95 | $82.95 | Yes |
| Durico 1100HD, Sony UPP-110HD compatible | $64.95 | $129.95 | Yes |
Orders of $99 or more ship free; below that, shipping is a flat $7.95. Every ULSTAR roll is FDA Registered, manufactured under ISO 9001, ISO 14001 and ISO 13485 in South Korea, and sealed in its own foil pouch.
Frequently Asked Questions
Which Durico paper replaces Sony UPP-110S for an MSK or pain management clinic?
Durico 1100S, a standard matte grade at 110mm × 20m, is the compatible replacement for Sony UPP-110S (Type I). Durico documents it for the Sony UP-895, UP-897 and UP-898 Series printers.
Should a sports medicine clinic use standard or high-density paper?
It depends on how the prints are used. Standard 1100S suits procedure and chart documentation at the lowest cost per roll. High-density 1100HD suits clinics that want a semi-glossy page with finer grayscale gradation and higher black density, for example for patient or referral handouts. This is a print-quality and workflow choice, not a diagnostic one.
Does the paper grade affect injection guidance or the clinical read?
No. Paper grade does not change what the ultrasound system captures or displays. A hardcopy is a documentation and reference tool, and the grade only changes how the printed grayscale looks on paper.
Can I use both grades in the same Sony printer?
Yes. Both are built for the same UP-895/897/898 Series printers and the same 110mm width. Update the printer's paper-type setting to match whichever roll is loaded.
Will the prints hold up to ultrasound gel and handling?
Durico's literature lists strong resistance to water, fingerprints and ultrasound gel drops across the ULSTAR line. It publishes no numeric durability figure, so test a sample roll in your own workflow.
Is Durico compatible with my portable or older Sony printer?
Durico documents compatibility with the UP-895, UP-897 and UP-898 Series for 110mm grades, and UP-970, UP-971, UP-990 and UP-991AD for 2100HD. Check the model label on your printer. If it falls outside those ranges, confirm fit before ordering.
How many rolls should a single-printer clinic keep on hand?
There is no universal number. Log your own prints per roll for a few weeks, then keep one spare box per printer and reorder when you open it. The 10-roll box reduces reorder frequency; the roll itself is identical.
The Bottom Line
For most MSK, sports medicine and pain management clinics, Durico 1100S covers the Sony UPP-110S spec for everyday chart and procedure documentation at the lowest cost per roll, and Durico 1100HD is the Sony UPP-110HD compatible option when a semi-glossy, higher-density page matters. Both run in the same UP-895/897/898 Series printers, so a clinic can start with one grade and add the other without changing hardware.
About Morgan Hayes
Morgan Hayes is the imaging supply specialist behind Precision Imaging Supply's resource center. With over a decade tracking the medical thermal printing market, Morgan helps imaging departments, OB/GYN clinics, veterinary practices, and independent ultrasound centers navigate the maze of printer-and-paper compatibility — including the Durico drop-in alternatives that save practices 30–50% versus OEM Sony media without compromising print quality.
Need Sony UPP-110S or UPP-110HD compatible paper for your MSK, sports medicine or pain management clinic? Shop Durico 1100S, the compatible replacement for Sony UPP-110S or Durico 1100HD, the compatible replacement for Sony UPP-110HD, in stock now at Precision Imaging Supply.